1. 3/4" Hardwood stile and rail doors, mortise and tenon.
2. 3/4" Hardwood drawer fronts.
3. 3/4" Face frames with glued and pocket screwed joints.
4. 1/2" Particle board back with Maple print interior, eliminating the need for hang rails.
5. 1/2" Particle board sides, tops and bottoms, with Maple print vinyl interior and exterior.
6. 5/8" Particle board drawer boxes with Maple print vinyl wrapped sides and 1/4" particle
 board bottom with Maple print interior.
7. Two drawer tracks available:
Standard - 75# Epoxy coated with self adjusting side mount drawer guides.
Upgrade – Blumontion undermount soft close drawer guides with 100 lb rating.
8. 3/4" Particle board shelving with Maple print vinyl on both sides and one edge. All 
 shelves are adjustable with base cabinets having ½ depth shelves, supported by metal shelf pegs.
9. Blum one piece adjustable concealed hinges with lifetime warranty.
10. Standard finish consists of hand wiped stain, a coat of sanding sealer and a topcoat
 of conversion varnish. Total finish thickness approximately 7 MIL, wet.
11. Available option: 1/4" Wood veneer sides.