Sustainable Resource – 83% of the material used in
constructing our cabinets consists of particle board, 100%
recycled/recovered fiber content, and is manufactured without
formaldehyde, meeting C.A.R.B. requirements.
Our products surpass California Air Resources Board air quality standards,
some of the most stringent in the USA
.
Construction Details
1. 3/4” Hardwood stile and rail doors, mortise
& tenon.
2. 3/4” Hardwood drawer fronts.
3. 3/4” Hardwood face frames, glued and pocket screwed jointed.
4. 1/2” NAUF particle board back with wood grained print interior,
eliminating the need for hang rails.
5. 1/2” NAUF particle board sides, tops and bottoms with wood grained
print interior and exterior.
6. 5/8” Dadoed drawer box with 1/4” bottom. Constructed from NAUF plywood. Dovetail drawer not available.
7. Two drawer tracks available:
Standard: 75# Epoxy coated with self adjusting side mount drawer
guides.(shown)
Upgrade: BluMotion undermount soft close drawer guides with 100 lb
capacity.
8. 3/4” NAUF particle board shelf with wood grained print on both sides
and
one edge. All shelves are
adjustable with base cabinets having 1/2 depth shelves.
9. Blum one piece adjustable concealed hinges.
** Available option: 1/4" NAUF MDF skin.
Wood Species
Available: Red Oak, Rustic Oak, Maple, Cherry, Beech, Birch & Rustic Beech
Stains Available: Citrus, Fruitwood, Harvest, Natural & Sable
|
Materials used
in Cabinet Box
NAUF particle board box: Contains no added urea-formaldehyde
Skins & finished interiors - decorative NAUF MDF
Adhesives: All adhesives are formaldehyde free
Finish - Top
Coat
Meets VOC requirements for LEED credit EQ 4.2
<1% Formaldehyde 267 g/l emitted VOCs |
Low VOC
Solvent Stains
Meets VOC requirements for LEED credit EQ 4.2
Hand wiped stain
LEED Credit
Points Available
EQ 4.4 Low emitting materials
MR 4.1, 4.2 Recycled content
MR 5.1, 5.2 Local materials |
|
